Wall Insulation Types

There are number of wall insulation types that are used in the construction stage of a residential or commercial building. The insulation you will require is dependent on the wall system and construction. For new buildings, insulation is mandatory and must comply with your Building Sustainability Index (BASIX) and the thermal requirements defined in your development application (DA).

Before deciding on the type of wall insulation you require, you must define what the R-Value requirement is and actual wall system that you have. The choices available to you include wall insulation batts, Sisalation and a broad range of air cell based products.

The following wall systems show the options available to you to insulate your walls.

Double Brick Cavity Wall

Suitable Products for Cavity Wall

AIR-CELL Permicav XV

AIR-CELL Permicav XV is specifically designed to reduce the risk of condensation in walls with cavities, and has improved vapour transmission by five times compared to old technology.

Kooltherm K8 Cavity Board

Kooltherm K8 Cavity Board is a super high performance, fibre-free rigid thermoset insulation suitable for Cavity Wall applications. It has a thermoset phenolic insulation core, sandwiched between two layers of reflective, low emissivity composite foil autohesively bonded to the insulation core during manufacture. This reflective, low emissivity surface improves the thermal resistance of any cavity adjacent to the board.

Steel Frame Walls

Aircell – Insulbreak

3-in-1 Insulation, Thermal Break, and Vapour Barrier

Kingspan AIR-CELL Insulbreak is a 3-in-1 insulation, vapour barrier and thermal break solution for steel-framed construction. In steel-framed buildings, Kingspan AIR-CELL Insulbreak delivers the R0.20 thermal break required for NCC BCA compliance*, reducing thermal bridging and conductivity between building elements. It is also commonly used in non-steel framed applications such as timber framed roofs.

Kooltherm K12 – Framing Board for Block walls

Insulation for Use behind Timber and steel Wall Lining and Framed Walls

Kingspan Kooltherm K12 Framing Board is a super high performance, fibre-free rigid thermoset phenolic insulation, faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective surface improves the thermal resistance of any cavity adjacent to the board.

Kingspan Kooltherm K12 Framing Board is manufactured without the use of CFCs/HCFCs and has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

External Timber or Steel Walls

Glasswool - Pink Batts

  • Provide excellent thermal insulation properties, keeping homes cooler in summer and warmer in winter
  • Improve the energy efficiency of a home to deliver energy cost savings.
  • Manufactured using an innovative technology which makes Pink Batts® softer to touch compared to traditional glasswool insulation.
  • Maintain their firmness ensuring products remain in place for ongoing thermal performance.
  • FBS-1 Glasswool Bio-Soluble Insulation® – safe to use.
  • Non-combustible.
  • CodeMark certified.
  • Good Environmental Choice Australia (GECA) certified.
  • Manufactured from up to 80% recycled content.
  • Australian made.

Polyester – Greenstuf Batts

Designed for the thermal insulation of timber-framed buildings. They come as insulation segments pre-cut to fit standard timber-framing Thermally molded into shape, they are designed to be self-supporting in walls and ceilings and require no stapling into place. GreenStuf® Thermal Batts are proudly made in Australia.

Tyvek – Breathable membrane for external walls

  • A micro-fibrous, highly breathable wall wrap used as an adjunct to bulk insulation in walls.
  • The tough structure of Tyvek® HomeWrap is engineered to create millions of extremely small pores that resist bulk water and air penetration whilst allowing water vapour to pass through.
  • Helps protect a home against damaging wind and rain that can penetrate through exterior cladding.
  • The unique structure of Tyvek® HomeWrap blocks excess water from entering into walls.
  • The Breathable structure of Tyvek® HomeWrap allows water vapour to pass through to facilitate drying in wall systems.

Styroboard

StyReflex Aluminium Foil Board Insulation

Designed and developed by Foamex, StyReflex™ is a clean, lightweight, non-sagging, non-irritant foil insulation sheet. Made from expanded polystyrene which has been foil laminated, StyReflex is available in different degrees of thickness making it suitable for a variety of uses and specifications.

StyReflex insulation sheets are aluminium foil-faced Styroboard™ sheets allowing for greater R-values to be obtained in open and confined spaces.

StyReflex is very cost effective and will not deteriorate, collapse, or lose thermal values over time. Construction pplications include insulation for walls and ceilings, under concrete slabs (e.g. carparks), warehouses, and sheds.

 

Eureka supplies and installs products from Australia’s leading suppliers for all your insulation needs. Call for advice on the wall insulation types that are suitable for your walls.

Contact Eureka on 1800 626 624 or use our enquiry form for more information on Wall insulation and pricing.

More: Floor, Wall and Ceiling Products

Ceiling

There are number of ceiling insulation types that are used in the construction stage of a residential of commercial building.

Floor

Underfloor insulation is a key part of a complete insulation solution. Cold air comes up through your floor and has a direct impact on your warmth.

Wall

There are number of wall insulation types that are used in the construction stage of a residential or commercial building. The correct choice is essential.